Pneumatic Carton Box Waste Stripper Die-Cut Waste Machine

Technical Specification

Item No.: HS-280

Type: Pneumatic stripper

Color: Black and Silver (you could choose the color you want)

Revolution: 2500 turns /min

Chain: #1 with 18 cogs（large size)

Air comsumption: 0.4㎡/min

Working pressure: 6~8 KG

Net weight:3.5 KG

Minimum cutting size: 5MM

Suitable paper: all kinds of paper. Efficienty will be higher for grey board paper / corrugating medium paper

Gross Weight：6.5 KG

Package Dimensions:490*170*240mm

Product Description

The compressed air driven HS-280 carton-stripper has a very narrow and filigree chain (the minimum waste edge width is 5mm). This stripper should be used only for very small die-cut waste which is deeper in the stack, but can be used for normal waste too.

Our pneumatic types HS-280 is very robust and very low-maintenance. For the US and UK market, all pneumatic types are also available with a two-handed safety system.

For the HS-280 carton stripper, we will free to offer you the lubrication unit. (Filter with water separator, reduction valve, pressure gauge, air line lubricator, mounting bracket and screws). It is absolutely necessary to use a lubrication unit to protect the air driven motor.

HS-280 Stripping tool is the most efficiency solution to remove diecut 

Lightning-fast stripping of the outer die-cut waste from carton, craft paper and corrugated board stacks with our HS-280 carton-stripper.

Finish the time‐consuming and stressful waste‐stripping by hand. Our HS-280 carton‐strippers allows lightning fast removal of die‐cut waste from folding carton, e‐flute, cardboard, microwave‐ , corrugated board, gray broad paper and craft paper. When breaking out the die‐cut waste with our HS-280 carton‐stripper, the sheets remain exactly stacked as they left the die‐cutter. Designed to meet the requirements of our customers, our HS-280 carton‐stripper have proven their worth in carton board and board processing worldwide for 15 years.

Requirements for using our technology

Prerequisite for using our technology is that the outside trim must be cut into trim sections. Except from this is the clutch edge. This will be stripped out reciprocally, on the left and right side. Please see the below principle picture for waste segments.

Subdivide the waste edge in a way that the chain can operate at the widest part of the waste edge. Furthermore, the smaller the number of nicks (to heed at new forms), the faster the stripping operation will go. HS-280 carton‐stripper removes the trim section by section at high speed. A section of the stack of 250 sheets high can be removed in one second for instance. This performance results in a substantial lowering of manual stripping cost.

Handling of our HS-280 carton-strippers.

The principle and handling is very simple.

The chain of HS-280 carton‐stripper is placed with some pressure on the outer edge of the waste before the device is switched on.

The rotating, hardened and hard‐chromed chain strips the exterior trim from the die‐cut sheet at high speed.

Slide down HS-280 carton‐stripper with some pressure on the waste trim.

Depending on the number of nicks and the breaks of the die‐cut waste, you have to do a right / left combination with HS-280 carton‐stripper to break out the die‐cut waste along the full length of the stack. A chrome‐plated cover over the chain prevents damage to the sheets and helps you to slide down the stack easily.